FixVault
Home › Lexus › 2008 › ES 350 › Repair and Diagnosis › Electrical › Gauges › Meter › Steering Pad Switch › Installation

Steering Pad Switch: Installation

  1. INSTALL STEERING PAD SWITCH ASSEMBLY 
    1. Engage the 4 claws.
    2. Install the steering pad switch assembly with the 2 screws.

      Torque: 2.4 N*m (25 kgf*cm, 21 in.*lbf) 

    3. Connect the connector to the spiral cable
  2. INSTALL STEERING PAD  (See INSTALLATION )
  3. INSTALL LOWER NO. 3 STEERING WHEEL COVER  (See INSTALLATION )
  4. INSTALL LOWER NO. 2 STEERING WHEEL COVER  (See INSTALLATION )
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    Fig 1: Locating Steering Pad Switch Assembly Screws With Claws
    G05252894Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSPECT SRS WARNING LIGHT  (See INSTALLATION )
  7. PERFORM INITIALIZATION 
    NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION ).
About FixVault