FixVault
Home › Lexus › 2008 › ES 350 › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel › Fuel Sender Gauge Assembly › Inspection

Fuel Sender Gauge Assembly: Inspection

  1. INSPECT FUEL SENDER GAUGE ASSEMBLY 
    1. Remove the fuel sender gauge assembly.
    2. Check that the float moves smoothly between F and
    3. Measure the resistance between the terminals 2 (S) and 3 (FE) of the connector according to the value(s) in the table below.

      Standard resistance: 

      Main 

      RESISTANCE REFERENCE TABLE

      Float Level Resistance (Ω)
      F 13.5 to 16.5
      Between E and F 13.5 to 414.5 (Gradually changes)
      E 405.5 to 414.5

      HINT:

      If the value is not as specified, replace the fuel sender gauge assembly.

      Fig 1: Identifying Fuel Sender Gauge Assembly
      G05252863Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault