FixVault
Home › Lexus › 2008 › ES 350 › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel › Fuel Sender Gauge Assembly › Removal

Fuel Sender Gauge Assembly: Removal

  1. DISCHARGE FUEL SYSTEM PRESSURE 

    HINT:

    (See PRECAUTION  ).

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See ELECTRONIC CIRCUIT INSPECTION PROCEDURE ).
  3. REMOVE REAR SEAT CUSHION ASSEMBLY  (See REMOVAL )
  4. REMOVE REAR FLOOR SERVICE HOLE COVER (See  REMOVAL   ) 
  5. SEPARATE FUEL PUMP TUBE SUB-ASSEMBLY (See  REMOVAL   ) 
  6. REMOVE FUEL TANK VENT TUBE SET PLATE (See  REMOVAL   ) 
  7. REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE (See  REMOVAL   ) 
  8. REMOVE FUEL SENDER GAUGE ASSEMBLY (See  REMOVAL   ) 
About FixVault