FixVault
Home › Lexus › 2008 › ES 350 › Repair and Diagnosis › External Pages › Different car › Section 65 (Steering Column) › Steering Column Assembly › Disassembly

Steering Column Assembly: Disassembly

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE STEERING LOCK ACTUATOR ASSEMBLY 
    1. Using a center punch, mark the center of the 2 tapered-head bolts.
    2. Using a 3 to 4 mm (0.12 to 0.16 in.) drill, drill a hole in the 2 tapered-head bolts.
    3. Using a screw extractor, remove the 2 tapered-head bolts and steering lock actuator assembly from the steering column assembly.
      4. Fig 1: Identifying Steering Lock Actuator Assembly Tapered-Head Bolts
      G05250846Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU (See  REMOVAL   ) 
About FixVault