Section 68 (Automatic Transaxle): TCM: Removal

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: When the TCM is replaced, the existing transaxle compensation codes must be input into the new TCM (See REGISTRATION ).

REMOVE COOL AIR INTAKE DUCT SEAL (See REMOVAL )
REMOVE BATTERY (See REMOVAL )
REMOVE AIR CLEANER INLET ASSEMBLY (See REMOVAL )
REMOVE NO. 1 AIR CLEANER INLET (See REMOVAL )
REMOVE INTAKE AIR RESONATOR SUB-ASSEMBLY (See REMOVAL )
REMOVE TCM
1. Turn the lock lever and disconnect the connector from the TCM.
  
  Fig 1: Locating TCM Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 bolts and TCM from the transaxle.
  
  Fig 2: Locating TCM Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002