FixVault
Home › Lexus › 2008 › ES 350 › Repair and Diagnosis › External Pages › Different car › Section 79 (Meter) › Light Control Rheostat › Installation

Light Control Rheostat: Installation

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL LIGHT CONTROL RHEOSTAT 
    1. Engage the 2 claws and install the light control rheostat.
  2. INSTALL NO. 1 SWITCH HOLE BASE 
    1. Connect each connector.
      Fig 1: Identifying Light Control Rheostat Claws
      G05252899Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the 4 clips and install the No. 1 switch hole base.
      3. Fig 2: Identifying No. 1 Switch Hole Base Clips
      G05252898Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY  (See INSTALLATION )
  4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH  (See INSTALLATION )
  5. INSTALL SIDE INSTRUMENT PANEL LH  (See INSTALLATION )
  6. INSTALL FRONT DOOR OPENING TRIM COVER LH  (See INSTALLATION )
  7. INSTALL FRONT DOOR SCUFF PLATE LH  (See INSTALLATION )
About FixVault