Rear Combination Light Assembly: Installation

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL REAR COMBINATION LIGHT ASSEMBLY
1. Engage the clip and install the rear combination light assembly with the screw and 3 nuts.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
  
  Fig 1: Identifying Rear Combination Light Assembly Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the connector and clamp.
  
  Fig 2: Locating Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR BUMPER ASSEMBLY (w/o Intuitive Parking Assist System) (See INSTALLATION )
INSTALL REAR BUMPER ASSEMBLY (w/ Intuitive Parking Assist System) (See INSTALLATION )
INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/ Intuitive Parking Assist System) (See REASSEMBLY )
INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH (See REASSEMBLY )
INSTALL REAR FLOOR FINISH PLATE (See REASSEMBLY )
INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (See REASSEMBLY )
INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (See REASSEMBLY )
INSTALL SPARE WHEEL COVER TRAY
INSTALL NO. 2 SPARE WHEEL COVER
INSTALL LUGGAGE COMPARTMENT FLOOR MAT
INSTALL REAR LIGHT ASSEMBLY
1. Install the rear light assembly with the 4 nuts.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
2. Connect the connector and clamp.
  
  Fig 3: Locating Rear Light Assembly Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LUGGAGE COMPARTMENT DOOR COVER (See INSTALLATION )
INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE (See INSTALLATION )
INSTALL LUGGAGE LOCK CONTROL CABLE PLATE (See INSTALLATION )
INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP (See INSTALLATION )