FixVault
Home › Lexus › 2008 › ES 350 › Repair and Diagnosis › External Pages › Different car › Section 80 (Lighting) › Turn Signal Flasher Assembly › Installation

Turn Signal Flasher Assembly: Installation

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL TURN SIGNAL FLASHER ASSEMBLY 
    1. Install the clamp and the turn signal flasher assembly.
    2. Connect the connector.
      Fig 1: Locating Turn Signal Flasher Assembly Clamp
      G05252554Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 1 SWITCH HOLE BASE  (See INSTALLATION )
  3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY  (See INSTALLATION )
  4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH  (See INSTALLATION )
  5. INSTALL SIDE INSTRUMENT PANEL LH  (See INSTALLATION )
  6. INSTALL FRONT DOOR OPENING TRIM COVER LH  (See INSTALLATION )
  7. INSTALL FRONT DOOR SCUFF PLATE LH  (See INSTALLATION )
About FixVault