Blower Unit: Reassembly

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY
1. Install the blower with fan motor sub-assembly with the 3 screws.
  
  Fig 1: Locating Blower With Fan Motor Sub-Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AIR INLET SERVO MOTOR
1. Install the air inlet servo motor with the 3 screws.
  
  Fig 2: Identifying Air Inlet Servo Motor Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CLEAN AIR FILTER
1. Install the clean air filter as shown in the illustration.
  
  Fig 3: Installing Clean Air Filter
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AIR FILTER COVER PLATE
1. Engage the 2 claws to install the air filter cover plate.
  
  Fig 4: Identifying Air Filter Cover Plate Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AIR DUCT SUB-ASSEMBLY
1. Engage the 4 claws to install the air duct sub-assembly.
  
  Fig 5: Identifying Air Duct Sub-Assembly Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002