FixVault

Room Temperature Sensor: Removal

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  2. REMOVE FRONT DOOR OPENING TRIM COVER LH  (See REMOVAL )
  3. REMOVE SIDE INSTRUMENT PANEL LH  (See REMOVAL )
  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH  (See REMOVAL )
  5. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE ROOM TEMPERATURE SENSOR 
    1. Disconnect the connector and air hose.
    2. Release the claw and remove the sensor.
      Fig 1: Locating Connector And Air Hose
      G05251303Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002