Rear Axle Hub Bolt: Replacement

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE REAR WHEEL
REMOVE REAR DISC BRAKE CALIPER ASSEMBLY (See REMOVAL )
REMOVE REAR DISC (See DISASSEMBLY )
AXLE - REAR AXLE HUB BOLT
REMOVE REAR AXLE HUB BOLT
1. Temporarily install the 2 nuts and washers to the rear axle hub bolt as shown in the illustration.
2. Using SST and a brass bar or a similar tool to hold the hub and bearing assembly, remove the rear axle hub bolt.
  SST 09628-10011
  
  Fig 1: Removing Rear Axle Hub Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR AXLE HUB BOLT
1. Install a washer and nut to a new bolt as shown in the illustration.
2. Using a brass bar or a similar tool to hold the hub and bearing assembly, install the rear axle hub bolt by tightening the nut.
  
  Fig 2: Installing Rear Axle Hub Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR DISC (See REASSEMBLY )
INSTALL REAR DISC BRAKE CALIPER ASSEMBLY (See INSTALLATION )
INSTALL REAR WHEEL
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)