DTC Check / Clear

CHECK DTC
1. Check the DTCs.
  1. Connect the Techstream (with CAN VIM) to the DLC3.
  2. Turn the engine switch on (IG).
  3. Check the DTCs by following the prompts on the tester screen.
    HINT:
    
    Refer to the Techstream operator's manual for further details.
2. Clear the DTCs.
  1. Connect the Techstream (with CAN VIM) to the DLC3.
  2. Turn the engine switch on (IG).
  3. Clear the DTCs by following the prompts on the tester screen.
    HINT:
    
    Refer to the Techstream operator's manual for further details.