Millimeter Wave Radar Sensor: Installation
- INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY
- Install the sensor with the 3 bolts.
Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
- Connect the sensor connector.
- Install the sensor with the 3 bolts.
- ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY (See ADJUSTMENT )
- INSTALL FRONT BUMPER ASSEMBLY (See INSTALLATION )
- INSTALL COOL AIR INTAKE DUCT SEAL (See INSTALLATION )
- PUT VEHICLE IN THESE CONDITION (See ADJUSTMENT )
- ADJUST FOG LIGHT AIM (See INSTALLATION )