Steering Pad Switch: Installation

INSTALL STEERING PAD SWITCH ASSEMBLY
1. Engage the 2 claws and pin and install the steering pad switch assembly.
2. Install the screw.
  Torque: 2.4 N*m (24 kgf*cm, 21 in.*lbf)
  
  Fig 1: Locating Steering Pad Switch Assembly Pins And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Engage the 2 claws and pin and install the steering pad switch assembly.
4. Install the screw.
  Torque: 2.4 N*m (24 kgf*cm, 21 in.*lbf)
  
  Fig 2: Identifying Steering Pad Switch Assembly Claws And Pin
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LOWER STEERING WHEEL BOSS COVER
1. Engage the 2 claws.
2. Install the lower steering wheel boss cover with the 2 screws.
  
  Fig 3: Locating Lower Steering Wheel Boss Cover Screws And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STEERING SHAKE DAMPER
1. Install the steering shake damper with the 2 screws.
2. Engage the 2 harness clamps.
INSTALL CRUISE CONTROL MAIN SWITCH (See INSTALLATION )
ADJUST SPIRAL CABLE with STEERING SENSOR (See INSTALLATION )
INSTALL STEERING WHEEL ASSEMBLY (for 2GR-FSE) (See INSTALLATION )

Fig 4: Locating Steering Shake Damper Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STEERING WHEEL ASSEMBLY (for 1UR-FSE) (See INSTALLATION )
INSTALL STEERING PAD (See INSTALLATION )
INSTALL LOWER NO. 3 STEERING WHEEL COVER
INSTALL LOWER NO. 2 STEERING WHEEL COVER
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
INSPECT STEERING PAD (See DISPOSAL )
INSPECT SRS WARNING LIGHT
(See DIAGNOSIS SYSTEM )