FixVault

Speed Sensor: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT SPEED SENSOR (NT) 
    1. Measure the resistance according to the value (s) in the table below.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Specified Condition (20°C (68°F))
      1-2 560 to 680 Ω

      If the resistance value is not as specified, replace the speed sensor.

      Fig 1: Identifying Terminals Of Speed Sensor Connector
      G05288194Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT SPEED SENSOR (SP2) 
    1. Measure the resistance according to the value (s) in the table below.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Specified Condition (20C (68°F))
      1-2 560 to 680 Ω

      If the resistance value is not as specified, replace the speed sensor.

      Fig 2: Identifying Terminals Of Speed Sensor Connector
      G05288194Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002