Floor Shift Assembly: Installation

INSTALL FLOOR SHIFT ASSEMBLY
1. Install the floor shift assembly with the 4 bolts.
  Torque: 8.3 N*m (85 kgf*cm, 73 in.*lbf)
2. Connect the connector to the floor shift assembly.
  
  Fig 1: Locating Shift Lock Release Button Cover Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY
1. Install the floor shift gear shifting rod sub-assembly with the nut.
  Torque: 13 N*m (130 kgf*cm, 9 ft.*lbf)
ADJUST SHIFT LEVER POSITION (See ADJUSTMENT )
INSPECT SHIFT LEVER POSITION (See ON-VEHICLE INSPECTION )

Fig 2: Locating Shifting Rod Sub-Assembly Nut
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT FLOOR HEAT INSULATOR NO.1 (See INSTALLATION )
INSTALL FRONT EXHAUST PIPE ASSEMBLY
(See INSTALLATION )
INSTALL CONSOLE BOX DUCT NO.2 (See INSTALLATION )
INSTALL CONSOLE BOX (See INSTALLATION )
INSTALL CONSOLE BOX REGISTER ASSEMBLY (See INSTALLATION )
INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See INSTALLATION )
INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See INSTALLATION )
REMOVE CONSOLE UPPER PANEL ASSEMBLY (See INSTALLATION )
INSTALL FRONT CONSOLE UPPER PANEL GARNISH (See INSTALLATION )
INSTALL ENGINE UNDER COVER NO.1
CONNECT BATTERY NEGATIVE TERMINAL
PERFORM INITIALIZATION
(See INITIALIZATION )