Floor Shift Assembly: Disassembly

REMOVE SHIFT LOCK RELEASE BUTTON COVER
1. Using a screwdriver, remove the shift lock release button cover.
  
  Fig 1: Locating Floor Shift Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE POSITION INDICATOR HOUSING UPPER
1. Disconnect the indicator light wire from the shift lever plate.
2. Using a screwdriver, remove the position indicator housing upper.
  
  Fig 2: Locating Shift Position Indicator
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE POSITION INDICATOR LENS
1. Using a screwdriver, remove the position indicator lens from the position indicator housing upper.
  
  Fig 3: Identifying Position Indicator Housing Plate Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY
1. Remove the indicator light wire from the position indicator housing lower.
2. Remove the position indicator bulb from the indicator light wire.
3. Remove the position indicator bulb cap from the position indicator bulb.
  
  Fig 4: Identifying Position Indicator Housing Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Disconnect the transmission control switch connector from the floor shift.
  
  Fig 5: Locating Transmission Control Switch Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Using a screwdriver, disengage the locking lug of terminals (4) and (8), and pull the terminals out from the rear.
  
  Fig 6: Identifying Transmission Control Switch Connector Terminals
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SHIFT LOCK RELEASE BUTTON
1. Remove the shift lock release button and spring from the floor shift.
  
  Fig 7: Identifying Shift Lock Release Button And Spring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE POSITION INDICATOR SLIDE COVER
1. Remove the position indicator slide cover from the shift lever guide housing.
2. Remove the No. 2 position indicator slide cover from the position indicator slide cover.
  
  Fig 8: Identifying Position Indicator Slide Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SHIFT LOCK CONTROL ECU SUB-ASSEMBLY
1. Remove the shift lever nut and lock pin from the floor shift assembly.
2. Remove the shift lever guide housing from the floor shift assembly.
  NOTE: First remove the shift lever nut and lock pin, then disengage the 2 claws.
  
  Fig 9: Identifying Shift Lever Nut And Lock Pin
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2 screws and shift lock control ECU.
  
  Fig 10: Locating Shift Lock Control ECU Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE POSITION INDICATOR LOWER HOUSING
1. Remove the position indicator lower housing from the shift lever guide housing.
  
  Fig 11: Identifying Position Indicator Lower Housing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE TRANSMISSION CONTROL SWITCH
1. Remove the transmission control switch from the shift lever guide housing.