FixVault
Home › Lexus › 2008 › GS 350 RWD › Repair and Diagnosis › Transmission › Automatic Trans › A760E Automatic Transaxle › Floor Shift Assembly › Inspection

Floor Shift Assembly: Inspection

  1. INSPECT TRANSMISSION CONTROL SWITCH 
    1. Connect the park/neutral position switch connector.
    2. Disconnect the transmission control switch connector from the shift lock control unit assembly.
      Fig 1: Identifying Transmission Control Switch
      G05288279Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Measure resistance according to the value(s) in the table below when the shift lever is moved to each position.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Shift Position Tester Connection Specified Condition
      S, "+" and "-" 3-7 Below 1 Ω
      Except S, "+" and "-" 3-7 10 kΩ or higher
      Fig 2: Identifying Transmission Control Switch Connector Terminals
      G05288280Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault