FixVault
Home › Lexus › 2008 › GS 450h › Repair and Diagnosis › Body & Frame › Door Locks › Engine Immobilizer › Id Code Box › Installation

Id Code Box: Installation

  1. INSTALL ID CODE BOX (IMMOBILIZER CODE ECU) 
    1. Install the ID code box (immobilizer code ECU) with the screw.
    2. Connect the connector.
    3. Engage the clamp.
      4. Fig 1: Identifying ID Code Box Clamp
      G05810905Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL DEFROSTER LOWER NOZZLE ASSEMBLY  (See INSTALLATION )
  3. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    (See INSTALLATION )

  4. REGISTER ECU COMMUNICATION ID 
    NOTE: When replacing the ID code box (immobilizer code ECU), perform initialization (See REGISTRATION  ).
  5. REGISTER KEY 
    NOTE: When replacing the ID code box (immobilizer code ECU), perform initialization (See REGISTRATION  ).
About FixVault