Brake Actuator: Disposal
- DISPOSE OF BRAKE ACTUATOR ASSEMBLY
- Using a drill, slowly make a hole at the circumference made by the center points of A and discharge the gas.CAUTION: Be sure to wear protective glasses as fragments may fly out due to pressure.
HINT:
- The hole may be drilled up to approximately 5 to 10 mm (0.197 to 0.394 in.) away from the point indicated by A.
- The gas is nitrogen which is colorless, odorless, and harmless.
- Using a drill, slowly make a hole at the circumference made by the center points of A and discharge the gas.