FixVault
Home › Lexus › 2008 › GS 450h › Repair and Diagnosis › Electrical › Gauges › Instrument Panel › Rear Console Box › Disassembly

Rear Console Box: Disassembly

  1. REMOVE REAR CONSOLE ARMREST ASSEMBLY 
    1. Remove the 4 screws and armrest.
      Fig 1: Identifying Rear Console Armrest Assembly Screws
      G05300425Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE CONSOLE BOX SUB-ASSEMBLY UPPER 
    1. Remove the console box as shown in the illustration.
      Fig 2: Identifying Console Box Sub-Assembly Upper
      G05300426Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE CONSOLE BOX WIRE 
    1. Disengage the clamp.
    2. Disconnect the connector and remove the console box wire.
      Fig 3: Identifying Console Box Wire Clamp And Connector
      G05811964Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE CONSOLE BOX ILLUMINATION LIGHT ASSEMBLY 
    1. Disengage the 2 claws and remove the console box illumination light assembly.
      2. Fig 4: Identifying Console Box Illumination Light Assembly Claws
      G05811968Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE POWER OUTLET SOCKET ASSEMBLY  (See REMOVAL )
  6. REMOVE POWER POINT SOCKET COVER 
    1. Using a screwdriver, detach the 2 claws and remove the socket cover.

      HINT:

      Tape the screwdriver tip before use.

      Fig 5: Locating Power Point Socket Cover Claws
      G05315235Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE STEREO JACK ADAPTER ASSEMBLY  (See REMOVAL )
  8. REMOVE NO. 5 CONSOLE BOX MOUNTING BRACKET 
    1. Remove the 2 screws and bracket.
About FixVault