How To Proceed With Troubleshooting

HINT:

• Use these procedures to troubleshoot the adaptive variable suspension system.
• *: Use Techstream.

1. VEHICLE BROUGHT TO WORKSHOP 
2. INSPECT BATTERY VOLTAGE 

   Standard voltage: 

   11 to 14 V 

   If the voltage is below 11 V, recharge or replace the battery before proceeding.

3. CHECK MULTIPLEX COMMUNICATION SYSTEM* 
   1. Check the DTC (see DTC CHECK/CLEAR  ).

      Result 

      RESULT REFERENCE
      
      

      Result	Proceed to
      DTC is not output	A
      DTC is output	B

   B: CHECK MULTIPLEX COMMUNICATION SYSTEM 

   A: Go to next step 

4. CHECK CAN COMMUNICATION SYSTEM* 
   1. Check the DTC (see DTC CHECK/CLEAR  ).

      Result 

      RESULT REFERENCE
      
      

      Result	Proceed to
      DTC is not output	A
      DTC is output	B

   B: CHECK CAN COMMUNICATION CIRCUIT 

   A: Go to next step 

5. WARNING LIGHT CHECK 
6. CHECK DTC* 
   1. Check the DTC (see DTC CHECK/CLEAR  ).

      Result 

      RESULT REFERENCE
      
      

      Result	Proceed to
      DTC is not output	A
      DTC is output	B

   B: PROBLEM SYMPTOMS TABLE 

   A: Go to next step 

7. DTC CHART 
8. CIRCUIT INSPECTION 
9. REPAIR 
10. CLEAR DTC* 
11. CHECK DTC* 
    1. Check the DTC (see DTC CHECK/CLEAR  ).

       Result 

       RESULT REFERENCE
       
       

       Result	Proceed to
       DTC is not output	A
       DTC is output	B

    B:  Go to step  6

    A: Go to next step 

12. CONFIRMATION TEST 

    NEXT: END