Shift Lever Position Sensor: Inspection
- INSPECT SHIFT LEVER POSITION SENSOR
- Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard resistance
TERMINALS RESISTANCE CHART7-1 (P) 7-2 (N) 7-3 (D) 7-4 (MJ) 7-5 (R) 7-6 (RV) 7-8 {B) 7-9 (FD) P position Below 1 Ω 4.2 to 5.1 kΩ 10 kΩ or higher Below 1 Ω 10 kΩ or higher 10 kΩ or higher 10 kΩ or higher 10 kΩ or higher R position 10 kΩ or higher 4.2 to 5.1 kΩ 10 kΩ or higher Below 1 Ω Below 1 Ω Below 1 Ω 10 kΩ or higher 10 kΩ or higher N position 10 kΩ or higher Below 1 Ω 10 kΩ or higher Below 1 Ω 10 kΩ or higher 10 kΩ or higher 10 kΩ or higher 10 kΩ or higher D position 10 kΩ or higher 4.2 to 5.1 kΩ Below 1 Ω Below 1 Ω 10 kΩ or higher 1O kΩ or higher 10 kΩ or higher Below 1 Ω B position 10 kΩ or higher 4.2 to 5.1 kΩ 10 kΩ or higher Below 1 Ω 10 kΩ or higher 10 kΩ or higher Below 1 Ω Below 1 Ω If operation cannot be done as specified, replace the shift lever position sensor.
- Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.