Inspection Procedure

1. Check with the customer if the vehicle has been turned by a turntable at parking.

   OK: Vehicle has not been turned by turntable. 

   HINT:

   If the engine switch is turned on (ACC or IG) while the vehicle is being turned by a turntable, the system may store the angular velocity at this time. For this reason, the vehicle position cursor may deviate.

   Fig 1: Checking Vehicle Condition When Vehicle Turned By Turntable

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NG : TURN ENGINE SWITCH TO ON (IG) POSITION WHEN VEHICLE IS COMPLETELY STOPPED 

OK : PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE