FixVault

Inspection Procedure

  1. CHECK ALL DOOR ENTRY LOCK AND UNLOCK OPERATION 
    1. Check that the all door entry lock and unlock functions operate normally.

      Result: 

      RESULT REFERENCE

      Result Proceed to
      Entry lock and unlock functions do not operate A
      Entry lock function does not operate B

      HINT:

      If the entry lock and unlock functions do not operate for a certain door, refer to the PROBLEM SYMPTOMS TABLE .

    B :  Go to step  4

    A : Go to next step 

  2. CHECK WIRELESS DOOR LOCK AND UNLOCK OPERATION 
    1. Check that the wireless door lock and unlock functions operate normally.

      OK: Wireless door lock and unlock functions operate normally. 

    NG :  GO TO

    OK : Go to next step 

  3. CHECK OPERATION OF KEY 
    1. After replacing the key with a normal one, check that the entry lock and unlock functions operate normally.

      OK: Entry lock and unlock functions operate normally. 

    NG : REPLACE CERTIFICATION ECU ASSEMBLY 

    OK : END (KEY IS DEFECTIVE) 

  4. CHECK MANUAL DOOR LOCK OPERATION 
    1. Check that the manual door lock function operates normally.

      OK: Manual door lock function operates normally. 

    NG :  GO TO POWER DOOR LOCK CONTROL SYSTEM 

    OK : Go to next step 

  5. READ VALUE USING TECHSTREAM (DOOR COURTESY SWITCH) 
    1. Check the DATA LIST for proper functioning of the each door courtesy switch.

      Multiplex Network Master Switch Assembly: 

      DATA LIST

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Courtesy Switch Courtesy switch / ON or OFF ON: Courtesy switch is pushed
      OFF: Courtesy switch is not pushed
      -

      Multiplex Network Door ECU front RH: 

      DATA LIST

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Courtesy Switch Courtesy switch / ON or OFF ON: Courtesy switch is pushed
      OFF: Courtesy switch is not pushed
      -

      Multiplex Network Door ECU rear LH: 

      DATA LIST

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Courtesy Switch Courtesy switch / ON or OFF ON: Courtesy switch is pushed
      OFF: Courtesy switch is not pushed
      -

      Multiplex Network Door ECU rear RH: 

      DATA LIST

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Courtesy Switch Courtesy switch / ON or OFF ON: Courtesy switch is pushed
      OFF: Courtesy switch is not pushed
      -

      Multiplex Network Body ECU: 

      DATA LIST

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Luggage Courtesy Switch Luggage compartment door switch / ON or OFF ON: Courtesy switch is pushed
      OFF: Courtesy switch is not pushed
      -

      OK: ON (door courtesy switch is pushed) appears on the screen. 

    NG :  GO TO LIGHTING SYSTEM

    OK : REPLACE COWL SIDE JUNCTION BLOCK LH ASSEMBLY