How To Proceed With Troubleshooting

HINT:

• The wireless door lock control system troubleshooting procedures are based on the premise that the power door lock system is operating normally. Check the power door lock system first before troubleshooting the wireless door lock control system.
• Use these procedures to troubleshoot the wireless door lock control system.
• *: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP 

   NEXT 

2. INSPECT BATTERY VOLTAGE 

   Standard voltage: 11 to 14 V 

   If the voltage is below 11V, recharge or replace the battery before proceeding.

   NEXT 

3. INSPECT COMMUNICATION FUNCTION OF LARGE-SCALE MULTIPLEX COMMUNICATION SYSTEM (BEAN)* 
   1. Use the Techstream to check if the Multiplex Communication System (MPX) is functioning normally.

      Result 

      RESULT REFERENCE
      
      

      Result	Proceed to
      MPX DTC is not output	A
      MPX DTC Is output	B

   B :  Go to MULTIPLEX COMMUNICATION SYSTEM

   A : Go to next step 

4. PROBLEM SYMPTOMS TABLE 

   Result 

   RESULT REFERENCE
   
   

   Result	Proceed to
   Fault Is not listed in problem symptoms table	A
   Fault Is listed In problem symptoms table	B

   B :  Go to step  6

   A : Go to next step 

5. OVERALL ANALYSIS AND TROUBLESHOOTING* 
   1. Terminals of ECU (see TERMINALS OF ECU  )
   2. Data LIST ACTIVE test (see DATA LIST / ACTIVE TEST  )
   3. On-vehicle Inspection (see ON-VEHICLE INSPECTION  )

   NEXT 

6. REPAIR OR REPLACE 

   NEXT 

7. CONFIRMATION TEST 

   NEXT : END