FixVault
Home › Lexus › 2008 › GS 460 › Repair and Diagnosis › Brakes › Traction Control › Brake Control › Brake Pedal Stroke Sensor › Inspection

Brake Pedal Stroke Sensor: Inspection

  1. INSPECT BRAKE PEDAL STROKE SENSOR ASSEMBLY 
    1. Inspect the brake pedal stroke sensor assembly. If any of the following occurs, replace the brake pedal stroke sensor assembly with a new one :
      • The surface of the brake pedal stroke sensor assembly is cracked, dented, or chipped off.
      • The connector or wire harness is scratched, cracked, or damaged.
      • The brake pedal stroke sensor assembly has been dropped.
        Fig 1: Locating Brake Pedal Stroke Sensor Assembly Nuts
        G05297196Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault