FixVault
Home › Lexus › 2008 › GS 460 › Repair and Diagnosis › Engine Performance › System › Engine Control System (1UR-FSE) - Circuit Tests And Repair Information › Engine Coolant Temperature Sensor › Removal

Engine Coolant Temperature Sensor: Removal

  1. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  2. REMOVE ENGINE UNDER COVER 
  3. DRAIN ENGINE COOLANT  (See COOLANT )
  4. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the engine coolant temperature sensor connector.
    2. Remove the engine coolant temperature sensor.
    3. Remove the gasket from the engine coolant temperature sensor.
    Fig 1: Locating Engine Coolant Temperature Sensor Connector
    G05804107Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault