FixVault
Home › Lexus › 2008 › GS 460 › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt › Seat Belt Control Ecu › Removal

Seat Belt Control Ecu: Removal

  1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT  (See REMOVAL )
  2. REMOVE LUGGAGE COMPARTMENT SIDE TRIM COVER LH 
  3. REMOVE LUGGAGE COMPARTMENT SIDE TRIM COVER RH 
  4. REMOVE TOOL BOX BOARD 
  5. REMOVE TOOL BOX  (See REMOVAL )
  6. REMOVE REAR FLOOR FINISH PLATE  (See REMOVAL )
  7. REMOVE LUGGAGE COMPARTMENT FRONT TRIM COVER  (See REMOVAL )
  8. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH  (See ADJUSTMENT )
  9. REMOVE SEAT BELT CONTROL ECU 
    1. Remove the 3 nuts and disconnect the seat belt control ECU and junction block assembly.
      Fig 1: Identifying Seat Belt Control ECU Nuts
      G05810828Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the claw.
      Fig 2: Identifying Claw
      G05810829Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disconnect the connectors.
    4. Remove the nut.
    5. Disengage the claw and remove the seat belt control ECU.
      Fig 3: Locating Connectors
      G05810830Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault