Inspection Procedure

CHECK MAP DISC
1. Check that the map disc is not deformed or cracked.
  
  Fig 1: Checking If Disc Is Deformed Or Cracked
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  OK: No deformations or cracks on map disc.
  
  NG: REPLACE MAP DISC
  
  OK: Go to Next Step
SET DESTINATION
1. Set another destination and check if the system can calculate the route correctly.
  OK: Route can be correctly calculated.
  
  NG: PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE
  
  OK: END