FixVault

Data List/Active Test

  1. READ DATA LIST 

    HINT:

    Using the Data List displayed on the Techstream, you can read the value of the switch, sensor, actuator, etc without parts removal. Reading the Data List as the first step in troubleshooting is one way to shorten the labor time.

    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch ON.
    3. Turn the Techstream ON.
    4. Enter the following menus: Body Electrical/desired system/Data List.
    5. According to the display on the Techstream, read the "Data List".

    BODY 

    DIAGNOSTIC NOTE

    Tester Display Measurement Item/Range Normal Condition Diagnostic Note
    Key Unlock Warning SW Unlock warning switch signal/ON or OFF ON. Key is in ignition key cylinder
    OFF No key is in ignition key cylinder
    -
    D Door Curtsey SW Driver side door courtesy switch signal/ON or OFF ON Driver side door is open
    OFF. Driver side door is closed
    -