FixVault

Data List/Active Test

  1. READ DATA LIST 

    HINT:

    Using the Data List displayed on the Techstream, you can read the value of the switch, sensor, actuator, etc. without parts removal. Reading the Data List as the first step in troubleshooting is one way to shorten the labor time.

    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch ON.
    3. Turn the Techstream ON.
    4. Enter the following menus: Body Electrical/desired system/Data List.
    5. According to the display on the Techstream, read the "Data List".

    Body Live 

    DIAGNOSTIC NOTE

    Tester Display Measurement Item/Range Normal Condition Diagnostic Note
    Key Unlock Warning SW Unlock warning switch signal/ON or OFF ON Key is in ignition key cylinder
    OFF No key is in ignition key cylinder
    -
    D Door Curtsey SW Driver side door courtesy switch signal/ON or OFF ON Driver side door is open
    OFF Driver side door is closed
    -
    P Door Curtsey SW Passenger side door courtesy switch signal/ON or OFF ON Passenger side door is open
    OFF Passenger side door is closed
    -
    Rear Door Curtsey SW Rear door courtesy switch signal/ON or OFF ON- Right or left rear door is open
    OFF Right and left rear doors are closed
    -
    Passenger lock Pos SW Passenger side door lock position switch signal/ON or OFF ON Passenger side door is lock is in UNLOCK position
    OFF Passenger side door lock is in LOCK position
    -
    Door Lock SW-Lock Manual door lock switch LOCK signal/ON or OFF ON Manual door lock switch is in LOCK position
    OFF Manual door lock switch is in neutral position
    -
    Door Lock SW-Unlock Manual door lock switch UNLOCK signal/ON or OFF ON Manual door lock switch is in UNLOCK position
    OFF Manual door lock switch is in neutral position
    -
    Door Key SW-Lock Key operation door lock switch signal/ON or OFF ON. Key operation door lock switch is in lock position
    OFF Key operation door lock switch is in neutral position
    -
    P Door Key SW-UL Key operation driver door unlock switch signal/ON or OFF ON Driver key operation door lock switch is in unlock position
    OFF Driver key operation door lock switch is in neutral position
    -
    Open Door Warning Door courtesy switch signal/ON or OFF ON Either door is open
    OFF. All doors are closed
    -

    Driver Door Live 

    DIAGNOSTIC NOTE

    Tester Display Measurement Item/Range Normal Condition Diagnostic Note
    Door Unlock Detection SW Driver side door unlock detection switch signal/ON or OFF ON. Driver side door is unlocked
    OFF Driver side door is locked
    -
  2. ACTIVE TEST 

    HINT.

    Performing the ACTIVE TEST using the Techstream allows the relay, VSV, actuator, etc. to operate without removing any parts. Performing the ACTIVE TEST as the first step of troubleshooting is one way to shorten labor time.

    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch ON.
    3. Turn the Techstream ON.
    4. Enter the following menus: Body Electrical/desired system/Active Test.
    5. According to the display on the Techstream, read the "Active Test".

    Body Live 

    DIAGNOSTIC NOTE

    Tester Display Test Part Control Range Diagnostic Note
    Open Door Warning Light Door warning light ON/OFF -
    Door Lock Door lock motor for all doors LOCK/UNLOCK -