On-Vehicle Inspection
- INSPECT DEFOGGER RELAY (Marking: DEFOG)
- Measure the resistance according to the value (s) in the table below.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard resistance
RESISTANCE SPECIFIED CONDITIONSTester Condition Specified Condition 3-4 Below 1 Ω (when battery voltage is not applied between terminals) 3-5 10 kΩ or higher (when battery voltage is not applied between terminals) 3-5 Below 1 Ω (when battery voltage is applied to terminals 1 and 2) If the result is not as specified, replace the relay.