Cooling System (Mechanical): Cooling: Radiator: Installation

INSTALL RADIATOR ASSEMBLY
1. Insert the tabs of the radiator support through the radiator service holes.
2. Install the radiator assembly with the 4 bolts.
  Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf)
  
  Fig 1: Identifying Radiator Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FAN SHROUD
1. Insert the tabs in the slots shown below, attach the fan shroud with the 2 bolts.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
  
  Fig 2: Identifying Fan Shroud Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIATOR RESERVE TANK ASSEMBLY
1. Install the reserve tank with the 3 bolts.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
2. Connect the reserve tank hose to the radiator.
INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
ADD ENGINE COOLANT (See REPLACEMENT )
INSPECT ENGINE COOLANT LEAK (See ON-VEHICLE INSPECTION )