FixVault
Home › Lexus › 2008 › GX 470 › Repair and Diagnosis › Suspension › Suspension Control Systems › Suspension Control › Height Control Dryer › Removal

Height Control Dryer: Removal

  1. REMOVE REAR DISC WHEEL 
  2. REMOVE QUARTER PANEL MUDGUARD REAR LH 
  3. REMOVE FUEL TANK FILLER PIPE PROTECTOR (See  REMOVAL   ) 
  4. REMOVE HEIGHT CONTROL COMPRESSOR COVER (See  REMOVAL   ) 
  5. REMOVE HEIGHT CONTROL FILTER (See  REMOVAL   ) 
  6. DISCONNECT HEIGHT CONTROL TUBE NO. 2 (See  REMOVAL   ) 
  7. REMOVE HEIGHT CONTROL DRYER ASSEMBLY 
    1. Disconnect the connector.
    2. Remove the 3 bolts.
    3. Remove the 3 bolts, the height control compressor and the dryer with the bracket.
      Fig 1: Identifying Height Control Compressor Bolts
      G04964532Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the bolt and the dryer.
    5. Remove the O-ring.
About FixVault