FixVault
Home › Lexus › 2008 › IS 250 AWD › Repair and Diagnosis › Body & Frame › Seats › Seat › Lumbar Support Adjuster Assembly › Removal

Lumbar Support Adjuster Assembly: Removal

  1. REMOVE FRONT SEAT HEADREST ASSEMBLY 
  2. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER  (See REMOVAL  )
  3. REMOVE FRONT INNER SEAT TRACK BRACKET COVER 
  4. REMOVE REAR OUTER SEAT TRACK COVER  (See REMOVAL  )
  5. REMOVE REAR INNER SEAT TRACK COVER 
  6. REMOVE FRONT SEAT ASSEMBLY  (See REMOVAL  )
  7. REMOVE FRONT INNER SEAT BELT ASSEMBLY  (See REMOVAL )
  8. REMOVE RECLINING POWER SEAT SWITCH KNOB  (See DISASSEMBLY  )
  9. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB  (See DISASSEMBLY  )
  10. REMOVE FRONT SEAT CUSHION SHIELD WITH INNER NO. 1 CUSHION SHIELD  (See DISASSEMBLY  )
  11. REMOVE FRONT INNER SEAT CUSHION SHIELD  (See DISASSEMBLY  )
  12. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY  (See DISASSEMBLY  )
  13. REMOVE FRONT SEAT HEADREST SUPPORT  (See DISASSEMBLY  )
  14. REMOVE FRONT SEAT HEADREST SUPPORT 
  15. REMOVE FRONT SEPARATE TYPE SEATBACK ASSEMBLY (w/o Seatback Board)  (See DISASSEMBLY  )
  16. REMOVE FRONT SEPARATE TYPE SEATBACK ASSEMBLY (w/ Seatback Board)  (See DISASSEMBLY  )
  17. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY 
    1. Disconnect the connector and clamps.
    2. Remove the 2 screws and lumbar support adjuster.
      Fig 1: Identifying Lumbar Support Adjuster Screws
      G05254005Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault