FixVault
Home › Lexus › 2008 › IS 250 AWD › Repair and Diagnosis › Electrical › Starter › Starting (4GR-FSE) › Engine Switch › Installation

Engine Switch: Installation

  1. INSTALL ENGINE SWITCH 
    1. Attach the 2 claws to install the switch.
    2. Connect the switch connector.
      3. Fig 1: Connecting Switch Connector
      G05750554Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)  (See INSTALLATION )
  3. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)  (See INSTALLATION )
  4. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL  (See INSTALLATION )
  5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY  (See INSTALLATION )
  6. INSTALL CONSOLE BOX  (See INSTALLATION )
  7. INSTALL CONSOLE BOX REGISTER ASSEMBLY  (See INSTALLATION )
  8. INSTALL FRONT ASH RECEPTACLE SUB-ASSEMBLY  (See INSTALLATION )
  9. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)  (See INSTALLATION )
  10. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)  (See INSTALLATION )
  11. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission)  (See INSTALLATION )
  12. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission)  (See INSTALLATION )
  13. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission)  (See INSTALLATION )
  14. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) 
  15. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) 
About FixVault