Injector Driver: Removal

REMOVE COOL AIR INTAKE DUCT SEAL (See REMOVAL )
REMOVE NO. 1 INLET AIR CLEANER (See REMOVAL )
REMOVE NO. 1 ENGINE COVER (See REMOVAL )
REMOVE INJECTOR DRIVER
1. Disconnect the 4 connectors from the injector driver.
  
  Fig 1: Locating Injector Driver Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the bolt, 2 nuts and injector driver.
  NOTE: Be careful not to drop or strike the injector driver.
  
  Fig 2: Locating Injector Driver Bolt And Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002