FixVault
Home › Lexus › 2008 › IS 250 AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System (4GR-FSE) - System And Component Testing, On-Vehicle Inspection, Removal, Inspection & Installation › Accelerator Pedal › Removal

Accelerator Pedal: Removal

  1. REMOVE ACCELERATOR PEDAL 
    1. Disconnect the accelerator pedal position sensor connector.
    2. Remove the 2 bolts and accelerator pedal.
    NOTE:
    • Avoid physical shock to the accelerator pedal.
    • Do not disassemble the accelerator pedal assembly.
    Fig 1: Locating Accelerator Pedal Position Sensor Bolts
    G05316286Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault