FixVault
Home › Lexus › 2008 › IS 250 AWD › Repair and Diagnosis › External Pages › Different car › Section 44 (Windshield/WINDOWGLASS) › Front Passenger Side Power Window Switch › Removal

Front Passenger Side Power Window Switch: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL 
    1. Using a molding remover, disengage the 4 claws and 2 clips, and remove the power window regulator switch assembly with front door armrest base panel
    2. Disconnect the connector.
      Fig 1: Identifying Claws And Clips Of Power Window Regulator Switch Assembly With Front Door Armrest Base Pane
      G05754252Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY 
    1. Disengage the 2 claws and remove the power window regulator switch assembly
      Fig 2: Identifying Claws Of Power Window Regulator Switch Assembly
      G05755778Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault