Shift Paddle Switch: Inspection

INSPECT SHIFT PADDLE SWITCH

Disconnect the switch wire connector from the transmission shift switch.
Measure the resistance between each terminal when the paddle shift is moved to each position.
Standard resistance

STANDARD RESISTANCE SPECIFICATION

Paddle Shift Position	Tester Connection	Specified Condition
Pull continuously "+" (Up shift)	SFTU - ECC	Below 1 Ω
Release "+" (Up shift)	SFTU - ECC	10 kΩ or higher
Pull continuously "-" (Down shift)	SFTD - ECC	Below 1 Ω
Release "-" (Down shift)	SFTD - ECC	10 kΩ or higher

If the resistance value is not as specified, replace the shift paddle switch.

Fig 1: Inspecting Shift Paddle Switch