FixVault
Home › Lexus › 2008 › IS 250 RWD, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › A960E Automatic Transaxle › Speed Sensor › Installation

Speed Sensor: Installation

  1. INSTALL TRANSMISSION REVOLUTION SENSOR (SP2 SENSOR) 
    1. Coat a new O-ring with ATF and install it to the transmission revolution.
    2. Install the transmission revolution sensor with the bolt.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    3. Connect the transmission revolution sensor connector.
    Fig 1: Locating Transmission Revolution Sensor (SP2 Sensor)
    G05318156Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL TRANSMISSION REVOLUTION SENSOR (NT SENSOR) 
    1. Coat a new O-ring with ATF and install it to the transmission revolution.
    2. Install the transmission revolution sensor with the bolt.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    3. Connect the transmission revolution sensor connector.
    Fig 2: Locating Transmission Revolution Sensor (NT Sensor)
    G05318155Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault