FixVault
Home › Lexus › 2008 › IS 250 RWD, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › A960E Automatic Transaxle › Speed Sensor › Removal

Speed Sensor: Removal

  1. REMOVE TRANSMISSION REVOLUTION SENSOR (NT) 
    1. Disconnect the transmission revolution sensor connector.
    2. Remove the bolt and transmission revolution sensor.
    3. Remove the O-ring from the transmission revolution sensor.
    Fig 1: Locating Transmission Revolution Sensor Connector (NT)
    G05318155Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE TRANSMISSION REVOLUTION SENSOR (SP2) 
    1. Disconnect the transmission revolution sensor connector.
    2. Remove the bolt and transmission revolution sensor.
    3. Remove the O-ring from the transmission revolution sensor.
    Fig 2: Locating Transmission Revolution Sensor Connector (SP2)
    G05318156Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault