BLUETOOTH Tel Check Mode

HINT:

Illustration may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed area may not be shown exactly the same as on the actual vehicle.

1. ENTER DIAGNOSTIC MODE  (See DTC CHECK/CLEAR  )
2. BLUETOOTH TEL CHECK 
   1. Select "Bluetooth TEL Check" from the "Diagnosis MENU" screen.
      Fig 1: Screen Display - Bluetooth TEL Check

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. BLUETOOTH CHECK 
   1. Select "Bluetooth Check" from the "Bluetooth Handsfree Check Menu" screen.
      Fig 2: Screen Display - "Bluetooth Handsfree Check Menu"

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Select "Serial Communication Log" from the "Bluetooth Check Menu" screen
      Fig 3: Screen Display - Bluetooth Handsfree Check Menu

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. The communication log data in the display ECU are displayed on this screen.

         HINT:

         The displayed data can be used as a reference.

         Fig 4: Screen Display - Serial Communication Log

         Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   3. Select "Software Version" from the "Bluetooth Check Menu" screen.
      Fig 5: Screen Display - Software Version

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Check the software version of the Bluetooth module.
         Fig 6: Screen Display - Software Version Of Bluetooth Module

         Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

         Screen Description: 

         SCREEN DESCRIPTION CHART
         
         

         Display	Contents
         General Version / *1	General software version of Bluetooth module If any of the API version, upper stack version, and low stack version is updated, the general version is upgraded.
         API Version / *2	API software version is displayed.
         Upper Stack Version / *3	Upper Stack version is displayed.
         Lower Stack Version / *4	Lower Stack version is displayed.

         HINT:

         This function is controlled by the built-in display ECU.

4. HANDSFREE VOICE QUALITY SET 
   1. Select "Handsfree Voice Quality Set" from the "Bluetooth Handsfree Check Menu" screen.
      Fig 7: Screen Display - Handsfree Voice Quality Set

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Check the handsfree voice level.
      Fig 8: Screen Display - Handsfree Voice Level

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Screen Description: 

      SCREEN DESCRIPTION CHART
      
      

      Display	Contents
      Received voice level adjustment / *1	Setting possible for the voice level received from Bluetooth compatible phones.
      Sent voice level adjustment / *2	Setting possible for the voice sent to Bluetooth compatible phones.

      HINT:

      This function is controlled by the built-in display ECU.

      NOTE: "Voice Quality Type" should not be changed.