FixVault
Home › Lexus › 2008 › IS 350 › Repair and Diagnosis › Body & Frame › Door Locks › Door Lock › Wireless Door Lock Control System › Data List / Active Test

Data List / Active Test

  1. READ DATA LIST 

    HINT:

    Using the Techstream's Data List allows switch, sensor, actuator, and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.

    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Read the Data List according to the display on the tester.

      Main Body ECU (Main body ECU RH): 

      TESTER DISPLAY REFERENCE

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Wireless Control Wireless door lock control function / ON or OFF ON: Operating
      OFF: Not operating      		 -
      Hazard Answer Back Hazard answer-back of wireless / ON or OFF ON: Operating
      OFF: Not operating      		 -
      Open Door Warning Open door warning / ON or OFF ON: Operating
      OFF: Not operating      		 -
      Auto Lock Time Automatic lock time / 60 s or 30 s 60 s: 60 seconds
      30 s: 30 seconds      		 -
      Trunk Lid Operation Luggage compartment door open function type /1 TIME/2 TIME/ 0.8 PR/ OFF 1 TIME: Luggage compartment door opens when LUGGAGE OPEN switch is pressed once
      2 TIME: Luggage compartment door opens when LUGGAGE OPEN switch is pressed twice
      0.8 PR: Luggage compartment door opens when LUGGAGE OPEN switch is pressed and held down for 0.8 seconds.
      OFF: Not operating      		 -
      Unlock 2 Operation 2 times operation of wireless unlock / ON or OFF ON: All doors unlock when UNLOCK is pressed twice
      OFF: All doors unlock when UNLOCK is pressed once      		 -
      Panic Function Panic function / ON or OFF ON: Operating
      OFF: Not operating      		 -
      Wireless Buzzer Resp Wireless door lock buzzer response / ON or OFF ON: Operating
      OFF: Not operating      		 -
  2. PERFORM ACTIVE TEST 

    HINT:

    Performing the Techstream's Active Test allows relays, VSVs, actuators, and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.

    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Perform the Active Test according to the display on the tester.

      Main Body ECU (Main body ECU RH): 

      TESTER DISPLAY REFERENCE

      Tester Display Test Part Control Range
      Hazard Turns the turn signal flasher relay ON / OFF Observe headlight and rear combination light for correct operation
      Wireless Buzzer Wireless door lock buzzer ON / OFF -
      Trunk and Back-Door Open Turns luggage compartment door opener motor ON / OFF Observe luggage compartment door
About FixVault