FixVault
Home › Lexus › 2008 › IS 350 › Repair and Diagnosis › Body & Frame › Door Locks › Engine Immobilizer › Certification Ecu › Installation

Certification Ecu: Installation

  1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) 
    1. Install the certification ECU (smart key ECU assembly) with the 2 nuts.
    2. Connect the connector.
      Fig 1: Identifying Certification ECU Nuts (Smart Key ECU Assembly)
      G05754589Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL SIDE LUGGAGE COMPARTMENT TRIM COVER 
  3. INSTALL LUGGAGE COMPARTMENT TRIM HOOK 
  4. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER 
  5. INSTALL ROPE HOOK 
  6. INSTALL ROOM LIGHT ASSEMBLY 
  7. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER 
  8. INSTALL ROPE HOOK ASSEMBLY 
  9. INSTALL DECK SIDE TRIM BOX LH 
  10. INSTALL DECK SIDE TRIM BOX RH 
  11. INSTALL LUGGAGE COMPARTMENT TRIM COVER 
  12. REGISTER ECU COMMUNICATION ID 
    NOTE: When replacing the certification ECU (smart key ECU assembly), perform initialization (See REGISTRATION ).
  13. REGISTER KEY 
    NOTE: When replacing the certification ECU (smart key ECU assembly), perform initialization (See REGISTRATION ).
About FixVault