FixVault
Home › Lexus › 2008 › IS 350 › Repair and Diagnosis › External Pages › Different car › Section 25 (Starting) › Engine Switch › Removal

Engine Switch: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH  (See REMOVAL )
  4. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH  (See REMOVAL )
  5. REMOVE CONSOLE PANEL SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE FRONT ASH RECEPTACLE ASSEMBLY  (See REMOVAL )
  7. REMOVE REAR ASH RECEPTACLE ASSEMBLY  (See REMOVAL )
  8. REMOVE CONSOLE BOX REGISTER ASSEMBLY  (See REMOVAL )
  9. REMOVE CONSOLE BOX  (See REMOVAL )
  10. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY  (See REMOVAL )
  11. REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL  (See REMOVAL )
  12. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)  (See REMOVAL )
  13. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)  (See REMOVAL )
  14. REMOVE ENGINE SWITCH 
    1. Disconnect the switch connector.
    2. Detach the 2 claws and remove the switch.
    Fig 1: Removing Engine Switch
    G05750551Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault