FixVault
Home › Lexus › 2008 › IS 350 › Repair and Diagnosis › External Pages › Different car › Section 28 (Heating / Air Conditioning System) › Room Temperature Sensor › Installation

Room Temperature Sensor: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ROOM TEMPERATURE SENSOR 
    1. Install the sensor with the claw
    2. Connect the connector and attach the air hose
      3. Fig 1: Locating Room Temperature Sensor
      G05755442Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY  (See INSTALLATION )
  3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  (See INSTALLATION )
  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See INSTALLATION )
  5. INSTALL SIDE INSTRUMENT PANEL LH  (See INSTALLATION )
  6. INSTALL FRONT DOOR OPENING TRIM COVER LH  (See INSTALLATION )
  7. INSTALL FRONT DOOR SCUFF PLATE LH  (See INSTALLATION )
  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
  9. INSPECT SRS WARNING LIGHT 

    (See DIAGNOSIS SYSTEM )

About FixVault