FixVault
Home › Lexus › 2008 › IS 350 › Repair and Diagnosis › External Pages › Different car › Section 53 (A960E Automatic Transaxle) › Pattern Select Switch › Removal

Pattern Select Switch: Removal

WARNING: This page is about a different car, the 2008 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  2. REMOVE FRONT DOOR OPENING TRIM COVER LH  (See REMOVAL )
  3. REMOVE SIDE INSTRUMENT PANEL LH  (See REMOVAL )
  4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE SWITCH BASE 
    1. Disengage the 4 claws, and remove the switch base from the lower instrument panel finish panel.
    Fig 1: Identifying Switch Base From Lower Instrument Panel Finish Panel
    G05318236Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE NO. 1 PATTERN SELECT SWITCH ASSEMBLY 
    1. Disengage the 2 claws, and remove the pattern select switch from the switch base.
    Fig 2: Identifying Pattern Select Switch From Switch Base
    G05318237Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault