Amplifier Antenna: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system (See PRECAUTION ).

NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
REMOVE ROOF HEADLINING ASSEMBLY
(See REMOVAL )

HINT:

Refer to the procedures up to " 2 Remove Roof Headlining Assembly".
REMOVE AMPLIFIER ANTENNA ASSEMBLY
1. Disconnect the connector
2. Disengage the clamp and remove the 2 nuts.
3. Disengage the clip and remove the amplifier antenna assembly.
  NOTE: If reusing the removed amplifier antenna assembly, do not touch the contact terminals.
  
  Fig 1: Identifying Amplifier Antenna Assembly Clip And Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002